Concrete Inserts (Manufactured to order)

MATERIAL:-
BS 1449 HR4 PO Z25 EN10147:1992 FE
250-G275 PG
BS 1449 Part 2
Rolling Tolerances To BS 2994
Concrete Strength:- 32N/M2

Finish:
Standard Finish:-
HDG = BS 729
PG = Pre Galvanised BS2989

Other finishes and materials available upon request.

Concrete Inserts are available in standard lengths of 3 and 6 metres which are supplied complete with polystyrene infill and End Caps in place. Non-standard lengths can be supplied in increments of 200mm. For shorter lengths, please consult our technical/sales department.

Concrete Inserts are manufactured from standard channel sections S100 and S200. The inclusion of Concrete Inserts into walls, floors, ceilings and ducts etc. at the initial stages of construction provides a flush surface for fixing and supporting electrical and mechanical services.

SIC100 41 x 41 x 2.5g Weight:- 2.64 Kg/M

SIC200 41 x 21 x 2.5g Weight:- 1.84 Kg/M

END CAP.  If site installation requires concrete insert to be cut, end caps MUST be re-inserted
at each end.

Nail to shuttering
before pouring

Remove
polystyrene 

Insert channel nut and secure bracket 

Recommended Loadings

Results prepared from tests carried out by the
department of Civil Engineering at the
University of Birmingham.

SIC200 

SIC100 

Point Load
(250mm centres)

 550 Kgs

750 Kgs 

Continuous Load
(per 1000mm)

 2200 Kgs

3000 Kgs 

Concrete Strength 32MN/M²